Thanks for your answer. I'll take a look to those links . Thanks Sent from Outlook for Android<https://aka.ms/AAb9ysg> ________________________________ From: Phil Wiggins <phil.wiggins@gmail.com> Sent: Friday, June 7, 2024 9:02:32 AM To: Líber Guzmán <libergr@gmail.com> Cc: frog@lists.frrouting.org <frog@lists.frrouting.org> Subject: Re: [FROG] help with quay.io/frrouting/frr:10.0.0 image You probably don't have any daemons set. You'll want to bind mount /etc/frr/frr.conf and /etc/frr/daemons with your expected configurations. See this example in containerlab: https://github.com/martimy/clab_mpls_frr https://github.com/martimy/clab_mpls_frr/blob/main/mpls_frr_vrf/config/r1/da... https://github.com/martimy/clab_mpls_frr/blob/main/mpls_frr_vrf/config/r1/fr... Or this example: https://github.com/ksator/frrouting_demo https://github.com/ksator/frrouting_demo/blob/master/demo1/frr100/daemons https://github.com/ksator/frrouting_demo/blob/master/demo1/frr100/frr.conf Cheers, Phil On Thu, 6 Jun 2024 at 23:10, Líber Guzmán <libergr@gmail.com<mailto:libergr@gmail.com>> wrote: Hello friends: Im trying to use this docker image frr:10.0.0 but I can not get into the router. When I try to execute VTYSH got the following error: / # vtysh Exiting: failed to connect to any daemons. Any solution for this? TIA Líber _______________________________________________ frog mailing list frog@lists.frrouting.org<mailto:frog@lists.frrouting.org> https://lists.frrouting.org/listinfo/frog