[dev] MPLS SWAP and POP configuration issue

[Kishore Aramalla]

Vijayalakshmi, Can you share your configuration.

Best,
Kishore

From: dev <dev-bounces at lists.frrouting.org> On Behalf Of Vijayalakshmi
Sent: Thursday, July 12, 2018 11:49 PM
To: dev at lists.frrouting.org
Subject: [dev] MPLS SWAP and POP configuration issue

Hello,

We are currently working with simulating a PE router in MPLS architecture.
We run zebra and ldp with below configuration
and facing issues in swapping and popping of label in zebra.

In my MPLS table I have the following entries,

zebra_2# show mpls table
 Inbound                            Outbound
   Label     Type          Nexthop     Label
--------  -------  ---------------  --------
      16      LDP    192.168.100.2         3
      17   Static    192.168.100.2        18

But still zebra is not swapping the label and also not forwarding the received traffic (inbound label 16/17) to the respective nexthop.

Is there any special command to activate mpls configuration ?
Can someone help us in a configuring zebra MPLS to pop label and swap label?

Thanks,
Vijayalakshmi
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.frrouting.org/pipermail/dev/attachments/20180713/5fef36a2/attachment.html>