[dev] vtysh: Missing "Show Ip" Commands

Donald Sharp sharpd at cumulusnetworks.com
Mon Aug 19 08:54:29 EDT 2019


Ignore my first email.  I needed to configure rip to do show commands

Since `show ip...` is missing can you give us the output of `show ver`?

donald

On Mon, Aug 19, 2019 at 8:34 AM Carr, Christopher
<christopher.carr at abaco.com> wrote:
>
> I was unclear if this should be asked on the dev mailing list or as an issue on GitHub.
>
> We are currently using Quagga on our systems and I am investigating moving over to FRRouting.
>
> I've been building FRRouting with a custom Yocto recipe, cross-compiled for the PPC.
> (I'm using one of the latest commits rather than a released version from GitHub, as there were some fixes for hosttools that was not available in the release)
> So far I've got it to the point where my build completes, and I have binaries that run on the target. As my system used quagga before, I've configured FRR to use the quagga and quaggavty user/groups. The installed files on the switch have also been chown'd with quagga/quaggavty as appropriate.
>
> The one thing that I'm having trouble figuring out is the exposing of the "show ip" commnds via vtysh.
>
> Running just zebra, staticd and ripd the vtysh utility will only show the default subset of "show" commands.
> All the "show ip", "show ip rip" etc are missing.
>
> However if I telnet directly to the ripd port, after setting a password via vtysh, then everything is present via that telnet connection.
> I've tried both  configure and privileged mode to see if the command set changed to display these, but neither did.
> I've included the output of the success and failure below.
>
> I've looked at the vtysh code however nothing is jumping out as obviously wrong.
>
> I'm guessing that I've not configured something in the build correctly, but I'm confused as to what it could be. Searching the mailing lists and GitHub issues hasn't unearthed and similar issues.
>
> Does anyone have any pointers to areas that I might look at to solve this be it in configuration, compilation or installation etc.
>
> Thanks
> Chris Carr
>
> Eg.
> [root at openware]# vtysh
> Hello, this is FRRouting (version 7.2-dev).
> Copyright 1996-2005 Kunihiro Ishiguro, et al.
> quagga-router# show
>   daemons         Show list of running daemons
>   debugging       Debugging functions
>   error           Information on errors
>   log-filter      Filter Logs
>   logging         Show current logging configuration
>   memory          Memory statistics
>   modules         Loaded modules
>   running-config  Current operating configuration
>   startup-config  Contents of startup configuration
>   thread          Thread information
>   version         Displays zebra version
>   work-queues     Work Queue information
>
> [root at openware]# vtysh -d ripd
> Hello, this is FRRouting (version 7.2-dev).
> Copyright 1996-2005 Kunihiro Ishiguro, et al.
> quagga-router# show
>   daemons         Show list of running daemons
>   debugging       Debugging functions
>   error           Information on errors
>   log-filter      Filter Logs
>   logging         Show current logging configuration
>   memory          Memory statistics
>   modules         Loaded modules
>   running-config  Current operating configuration
>   startup-config  Contents of startup configuration
>   thread          Thread information
>   version         Displays zebra version
>   work-queues     Work Queue information
>
> [root at openware]# telnet localhost 2601
> [root at openware]# telnet localhost 2602
> Hello, this is FRRouting (version 7.2-dev).
> Copyright 1996-2005 Kunihiro Ishiguro, et al.
> User Access Verification
> Entering character mode
> Escape character is '^]'.
> Password:
> openware>
> openware> show
>   commandtree  Show command tree
>   debugging    Debugging information
>   error        Information on errors
>   evpn         EVPN
>   history      Display the session command history
>   interface    Interface status and configuration
>   ip           IP information
>   ipv6         IPv6 information
>   log-filter   Filter Logs
>   logging      Show current logging configuration
>   memory       Memory statistics
>   modules      Loaded modules
>   mpls         MPLS information
>   pbr          Policy-Based Routing
>   thread       Thread information
>   version      Displays zebra version
>   vrf          VRF
>   work-queues  Work Queue information
>   zebra        Zebra information
>
> _______________________________________________
> dev mailing list
> dev at lists.frrouting.org
> https://lists.frrouting.org/listinfo/dev



More information about the dev mailing list