[FROG] setting up frr for pim-sm

owen s owen94012 at gmail.com
Sat Oct 30 12:26:49 UTC 2021


Hello everyone

I have read the basic setup of FRR and I would like to setup pim-sm

I edited daemons to enable pimd, here's a list of running processes
root      3541  0.0  0.0  12644  4012 ?        S<s  Oct28   0:03
/usr/lib/frr/watchfrr -d -F traditional zebra pimd staticd
frr       3558  0.0  0.2 395068 10136 ?        S<sl Oct28   0:02
/usr/lib/frr/zebra -d -F traditional -A 127.0.0.1 -s 90000000
frr       3563  0.0  0.1  15744  6084 ?        S<s  Oct28   0:00
/usr/lib/frr/pimd -d -F traditional -A 127.0.0.1
frr       3571  0.0  0.1  13524  4548 ?        S<s  Oct28   0:00
/usr/lib/frr/staticd -d -F traditional -A 127.0.0.1

I am trying to set up pim through the vtysh command but I am not sure that
I understand properly using vtysh.

I launch vtysh, then I run configure terminal command, then when I try to
run any of the commands from this page:
http://docs.frrouting.org/en/latest/pim.html

I keep getting either incomplete command, for example ip pim rp 10.10.64.1
No Path to RP address specified: 10.10.64.1

I have two interfaces, interface eth0 ip address 10.10.60.65/26, it needs
to have pim sparse-mode enable on that interface.

How can I configure that using vtysh?

Best,
Owen
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.frrouting.org/pipermail/frog/attachments/20211030/37a87ddb/attachment.htm>


More information about the frog mailing list