Hi,
brief: 'sh ip ospf database' do not show networks, configured on OVS
bridges, while neighbors see these networks.
Details:
Here is 8.5.2-0~ubuntu22.04.1 from FRR repo and Openvswitch from Ubuntu
repo (2.17.7-0ubuntu0.22.04.1 ). Host configured with OVS bridges
(br-ex, bt-int), 802.1q subinterfaces (orange) and plain links (blue)
and marked in bold below are subject of the question:
3: blue: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP
group default qlen 1000
inet 100.64.98.3/24 brd 100.64.98.255 scope global blue
valid_lft forever preferred_lft forever
8: orange@ens2f1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1496 qdisc
noqueue state UP group default qlen 1000
inet 100.64.99.3/24 brd 100.64.99.255 scope global orange
valid_lft forever preferred_lft forever
*10: br-ex: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue
state UNKNOWN group default qlen 1000**
** inet 192.145.111.65/27 brd 192.145.111.95 scope global br-ex**
** valid_lft forever preferred_lft forever**
****11: br-int: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1496 qdisc noqueue
state UNKNOWN group default qlen 1000**
** inet 100.64.4.1/23 brd 100.64.5.255 scope global br-int**
** valid_lft forever preferred_lft forever*
OSPF configuration on FRR is the following:
interface blue
ip ospf dead-interval 4
ip ospf hello-interval 1
no ip ospf passive
exit
!
interface orange
ip ospf dead-interval 4
ip ospf hello-interval 1
no ip ospf passive
exit
!
router ospf
ospf router-id 100.64.4.1
passive-interface default
network 100.64.4.0/23 area 0
network 100.64.98.0/24 area 0
network 100.64.99.0/24 area 0
network 192.145.111.0/24 area 0
default-information originate
exit
but while br-ex and br-int networks are missing in output of 'sh ip ospf
database'
# sh ip ospf database
OSPF Router with ID (100.64.4.1)
Router Link States (Area 0.0.0.0)
Link ID ADV Router Age Seq# CkSum Link count
100.64.0.1 100.64.0.1 136 0x800000f8 0xfe2e 5
100.64.2.1 100.64.2.1 135 0x800000ba 0xcd74 3
100.64.4.1 100.64.4.1 96 0x80000374 0xceaf 4
Net Link States (Area 0.0.0.0)
Link ID ADV Router Age Seq# CkSum
100.64.98.2 100.64.2.1 136 0x80000006 0xf9af
100.64.99.2 100.64.2.1 136 0x80000006 0xeeb9
AS External Link States
Link ID ADV Router Age Seq# CkSum Route
0.0.0.0 100.64.0.1 1183 0x800000b9 0x4624 E2 0.0.0.0/0 [0x0]
0.0.0.0 100.64.4.1 130 0x800000bd 0x2240 E2 0.0.0.0/0 [0x0]
neighboring routers see them:
O>* 100.64.4.0/23 [110/20] via 100.64.98.3, blue, weight 1, 00:35:57
* via 100.64.99.3, orange, weight 1, 00:35:57
O>* 192.145.111.64/27 [110/20] via 100.64.98.3, blue, weight 1, 00:16:17
* via 100.64.99.3, orange, weight 1, 00:16:17
I guess the issue can be with UNKNOWN state of the interface (though
LOWER_UP says that everything is ok with underlay). So the question is -
whether this can lead to any issues (I do not see them at the moment
except troubleshooting in case) or it worth attention and need to be
fixed in some ways? If yes - in which ways it should be fixed?
Thank you.
--
Volodymyr Litovka
"Vision without Execution is Hallucination." -- Thomas Edison
