dev
Threads by month
- ----- 2026 -----
- February
- January
- ----- 2025 -----
- December
- November
- October
- September
- August
- July
- June
- May
- April
- March
- February
- January
- ----- 2024 -----
- December
- November
- October
- September
- August
- July
- June
- May
- April
- March
- February
- January
- ----- 2023 -----
- December
- November
- October
- September
- August
- July
- June
- May
- April
- March
- February
- January
- ----- 2022 -----
- December
- November
- October
- September
- August
- July
- June
- May
- April
- March
- February
- January
- ----- 2021 -----
- December
- November
- October
- September
- August
- July
- June
- May
- April
- March
- February
- January
- ----- 2020 -----
- December
- November
- October
- September
- August
- July
- June
- May
- April
- March
- February
- January
- ----- 2019 -----
- December
- November
- October
- September
- August
- July
- June
- May
- April
- March
- February
- January
- ----- 2018 -----
- December
- November
- October
- September
- August
- July
- June
- May
- April
- March
- February
- January
- ----- 2017 -----
- December
- November
- October
- September
- August
- July
- June
- May
- April
- March
- February
- January
- ----- 2016 -----
- December
- November
- October
March 2019
- 20 participants
- 20 discussions
Hi all,
I'm very happy to announce we have released version 7.0 of FRRouting!
[https://github.com/FRRouting/frr/releases]
There are some major changes in this release, specifically libyang
[https://github.com/CESNET/libyang] is now a hard requirement to build and run
FRRouting. Here's the full list of major changes from 6.0.x to 7.0:
- YANG data modeling & NETCONF support has arrived for the following daemons:
- ripd
- ripngd
- isisd
Note that this uses FRR-specific models and may still be subject to some
changes. Feedback is strongly appreciated!
- Error Codes / Categories are now added to log messages. They are printed as
[EC 99999999999] on log messages and identify classes of errors. The
library, bgpd, ospfd and zebra have been properly extended to categorize
errors while the other daemons have somewhat more rudimentary cateogries.
- "configure terminal" in the CLI is no longer an exclusive state on any
daemon, i.e. multiple users can edit the configuration at the same time in
all daemons. This was previously already the case for zebra and isisd.
- BGP enhancements:
- EVPN Duplicate Address Detection
- EVPN route servers
- EVPN extended mobility
- Global IPv6 addresses can be used for RFC5549 (v4-over-v6) nexthops
- Flowspec protocol support has been significantly extended. (Note that OS
integration is still very incomplete.)
- Add-Path IDs are now reused on transmission when possible
- Aggregates now properly aggregate extended and large community attributes
- IS-IS:
- BFD support has been added
- triggered hellos have been implemented
- new daemon: OpenFabric (a datacenter variant of IS-IS - cf.
https://datatracker.ietf.org/doc/draft-white-openfabric/)
- Zebra's kernel/dataplane interface is undergoing a rewrite and parts have
been moved into a separate thread with a more extensible architecture. Work
on this project is ongoing.
- staticd now supports onlink nexthops for static routes
- sharpd now supports nexthop groups for route installs
- many bugs were fixed, also including quite a few overdue documentation
improvements. This also includes CVE-2017-3224 which is a low-severity
low-impact OSPF vulnerability (as evident by the 2017 date.)
Important packaging and build related changes:
- libyang is now required to build and run FRRouting. Version 0.16.74 or
newer (e.g. 0.16-r3 which is 0.16.105) is strongly recommended. Older
versions will create additional hazards at both build and runtime because
an extension module needs to be installed. Support for libyang versions
before 0.16.74 will be removed in the next non-stable FRRouting version.
- when using libyang before 0.16.74, make sure to specify the
"--with-libyang-pluginsdir=/usr/lib/frr/libyang_plugins" option (change
path to fit system)
- Debian packaging has been completely overhauled (matches the changes in
6.0.2.) If you are creating derivative Debian packages, updates will be
necessary.
- RPKI and SNMP are now separate packages that can be installed
additionally. There are no longer distinct "RPKI" and "no RPKI" versions
of FRRouting on Debian.
- Debian packages are now provided in a repository at:
https://deb.frrouting.org/
- Snapcraft packaging has been updated to match.
- There is a new "--enable-static-bin" option to link libfrr statically into
FRR binaries. This is the only supported way of doing any static linking
of FRR. ("--disable-shared" is NOT supported.)
- all daemons now properly complete their startup before allowing their parent
to exit when the -d daemonization option is used. This should remove the
need for any "sleep" calls or start retrying in init scripts.
- some minor non-reproducibility issues were fixed. FRRouting should now
always build reproducibly.
- the topotests system that was previously maintained separately is now
shipped as part of the FRR source under tests/topotests.
As you can see this is quite a changelog and I'd like to thank everyone who
contributed to this release. It has been a very productive 6 months!
Cheers,
-David
1
0
Could you please add me in slack?
Regards
Amod.
1
0
Can i please be added to join slack.
Sincerely,
*Muhammed Ibrahim *
*muhe31(a)gmail.com* <muhe31(a)gmail.com>
4
8
Hi,
Is it possible to join the Slack workspace?
Thanks in advance,
Alexis Bauvin
1
0
Request to join slack. Also, dev, dev dev dev. ;)
Simon-
1
0
Hi,
Can you please send me an invite to FRR slack chats?
Thanks
1
0
Hi Everyone,
Can you please send me the invite for slack channel?
I am a network protocol developer. I would like to contribute to FRR.
Regards,
Manjunatha S M
1
0
Hi everyone,
I am Network engineer, would like to get the invite to slack channel please.
Regards,
Marius
1
0
Hi,
Can I get an invite to slack channel?
--
Thanks
Suquan
1
0
All -
With the 7.0 release being imminent, I'd like to take a moment to
reflect on, and thank everyone, for all the great contributions to FRR
over the last 4-5 months that we've seen. There has been a lot of
hard work from a whole bunch of people( and more than likely a few
people not listed directly below ). I'm looking forward to more
continued success!
donald
------------
This release has 1395 files changed, 91796 insertions(+), 24764 deletions(-)
And here is the list of contributors:
Ameya Dharkar (5):
bgpd: BGP JSON show commands enhancements
bgpd: Incorrect sent prefix count for a split subgroup
bgpd: BGP JSON new fields
bgpd: Display default local preference and local AS for BGP show
commands
bgp: new topotest BGP templates to display default local preference
and local-AS in BGP commands
Anton Degtyarev (4):
bgpd: fix bgp path info for mplsvpn leaked routes so that they are
correctly seen (and checked) by the rnh module in Zebra
bgpd: Fix bgpd doing vpn_leak_postchange_all() every time "router bgp
ASNUM" command is entered in vtysh
bgpd: add missing endline
bgpd, zebra: auto assign labels from label pool to regular prefixes in
BGP labeled unicast
Anuradha Karuppiah (8):
zebra: resolve link dependencies post nldump
bgpd: hidden commands to add/del a local mac
zebra: send a local-mac del to bgpd on mac mod to remote
bgpd: perform route selection again when the local path is deleted
bgpd: use IP address as tie breaker if the MM seq number is the same
zebra: make neigh active when it is modified from local to remote
zebra: set remoteseq to 0 when remote mac is deleted by bgpd
bgpd: move non-best local path checks outside the function
Biswajit Sadhu (1):
lib: Ensure FRR detects running of the second instance of a FRR
daemon, doesnot allow it to run.
Chirag Shah (21):
*: pthread set name abstraction
ospf6d: fix ospf6 crash in inp lsa processing
ospf6d: abr summary advertise best route
bgpd: dup addr detect data struct for cfg
bgpd: dup addr detect config cli
zebra: dup addr detect zapi changes
zebra: dup addr detect warn-only
zebra: dup addr detect freeze action
lib, zebra: dup addr detect display detection fields
zebra: dup addr detect operation commands
zebra: dup addr detect clear command
zebra: dup addr detect fix warnings
zebra: dup addr detect add fields to show evpn cmd
bgp, zebra: address review comments
zebra: dup addr detect neigh consolidation
zebra: dup addr detect mac consolidation
zebra: dup addr detect clear cmd non-zero return
bgpd: set attribute change flag to evpn imported
bgpd: l3vni add-del handle non-defualt rt
bgpd: evpn command to restrict to default vrf
ospfd: address CVE-2017-3224
Christian Franke (123):
doc/developer/openwrt: Update instructions for building for OpenWRT
fabricd: add new daemon as build of isisd
zebra: add RTPROT_FABRICD route type 197
vtysh: support fabricd
isis: Cleanup CLI, split into parts which are shared, fabricd and
isisd
isisd: Fix error output for 'no ip router isis' command
fabricd: adjust IS-IS defaults as per draft
fabricd: adjacency formation optimization as per section 2.4
fabricd: run a hop-by-hop spf
isisd: move spf datastructures to a header, to share with fabricd
fabricd: Add support for TLV 150 (Spine-Leaf-Extension)
fabricd: allow to configure tier-level advertisement
fabricd: implement fabric locality detection algorithm
fabricd: implement asymmetric metric for tier 0 as per Section 6.2
fabricd: reimplement LSP transmission logic
fabricd: support transmission/reception of circuit-scoped LSPs
fabricd: add field with first and second nexthop to SPF paths
fabricd: build a list of neighbors and neighbors neighbors
fabricd: implement flooding optimization
fabricd: add flooding algorithm debugging
isisd: add support for Prefix-SID subtlv
tests/isisd: remove auth when fuzzing
isisd: add TLV 13 Purge Originator Identification
isisd: add purge originator identification support
fabricd: Remove processing for unneded PDUs and TLVs
fabricd: trigger CSNP after flooding scope LSP has been received
zebra: add a ZEBRA_FLAG_ONLINK so that routes bypass the is-unnumbered
check
fabricd: add support for completely unnumbered operation
isisd: fix warnings by removing union isis_N and going to void *
instead
doc: add documentation for fabricd
doc: Use `mv -f` in Makefile
tools: Update .gitignore
zebra_ptm: Introduce IS_BFD_ENABLED_PROTOCOL macro
zebra_ptm: Add IS-IS and OpenFabric as protocols supporting BFD
isisd: Add forward declaration of struct isis_route_info
isisd: Register as BFD client
isisd: Replace isis_event_adjacency_state_change with a hook
isisd: Add BFD configuration commands
isisd: Add a hook when writing interface config
isisd: Write BFD config
isisd: Register/deregister BFD peers for adjacencies
isisd: Implement BFD replay function
isisd: Add debugging for BFD
isisd: Track BFD state and take down adjacency on failure
isisd: don't add deprecated bfd command
isisd: Address code-style warnings
isisd: Fix license header of bfd code
isisd: Unlink LSP fragments from LSP0 on lsp_destroy
isisd: adjust lsp size to area->lsp_size before packing
isisd: Log SPF trigger source when debugging
isisd: Log LSP-update trigger source
isisd: Combine lsp_l1/l2_refresh
isisd: delay lsp regeneration while events are still coming in
debianpkg, tools: Add fabricd to distribution scripts
configure: Check whether libyang has ENABLE_LYD_PRIV
doc: Add building-libyang.rst to distfiles
isisd: Remove unused debug flags
isisd: Adjust duration until lsp is regenerated
isisd: Remove unused debug flags
isisd: Fix lsp_build_list_nonzero_ht
fabricd: never flood back through the incoming interface
isisd: Fix issues with purged fragments
tests: Verify correct operation of lsp_build_list_nonzero_ht
isisd: Always consider purges as newer
fabricd: Fix flooding bug
isisd: Fix behavior on reception of self-originated LSP
isisd: Consider non-mt links usable when either v4 or v6 works
isisd: Fix bug in tlvs_protocols_supported_to_adj
lib/vty: Fix warning about shadowed variable
ldp-topo1: fix parsing for iproute from Ubuntu 18.04
ospf6-topo1: make ip-route comparison more robust
lib: check presence of mpls modules, not exitcode of modprobe
lib/ospf-topo1-vrf: don't compare headers of show ip route
ospf6-topo1: Don't compare link-local routes
Dockerfile: Move to project root and combine RUNs
docker: Run container with its own network namespace
docker: reindent shell scripts
docker: Install topotests into image
Docker: Update buildscripts to be more efficient
Dockerfile: Use iputils-ping instead of inetutils-ping, install strace
Docker: Call the run script frr-topotests.sh
Docker: Update buildscript not to delete old images
Docker: really cleanup when TOPOTEST_CLEAN is specified
Docker: Allow executing topotests while in subdir of FRR repo
Docker: move openvswitch setup to separate script
Docker: Use pytest as default command
Docker: Document additional environment variables
Docker: Fail if compilation is unsucessful
Dockerfile: Install libyang
docker: Improve README and frr-topotests usage
docker/compile_frr: Don't build with disable shared
docker/frr-topotests: Fix missing $ in if check
topotests: Adapt docker changes for integrated tests
topotests: Only set -t when input is a terminal
tests/topotests: Update documentation
tests/topotests: Change docker build context
tests/topotests: Set -o cache_dir=/tmp
Revert "tests/topotests: Change docker build context"
isisd: Add level&circuit thread argument to circuit
isisd: reduce code duplication for levels
isisd: Move dr election timer to the end of isis_dr_commence
lib: add thread_timer_remain_msec function
isisd: add send_hello_sched function
isisd: trigger hellos on adjacency state change
topotests/isis-topo1: Set useful IS-IS debugs
topotests: Update json_cmp_result to return readable result
tests/topotests: Use copied tests in Docker
tests/topotests: Also search sbin for modprobe
isisd: Add debug output for tx-queues
isisd: Remove unused t_send_lsp timer
isisd: Provide better flooding debugging
fabricd: Populate NL from adjdb, not spf
isisd: Move code to find LSP out of show database
isisd: Make lspid_print non-static
fabricd: Add `show openfabric flooding` command
fabricd: Improve LSP flooding log
fabricd: make triggered csnp delay configurable
fabricd: Update neighbor list on adjacency state change
isisd: Provide statistics about sent/received PDU count
isisd: Provide statistics about retransmitted LSPs
isisd: Provide statistics over number of LSP regenerations
isisd: Provide statistics over number of generated purges
tests/topotests: Pull docker image from registry
Christoffer (6):
.github: Updated PULL_REQUEST_TEMPLATE.md per Quentin's request.
.github: Add ISSUE_TEMPLATE.md
.github: Updated ISSUE_TEMPALTE.md
.github: Updated ISSUE_TEMPALTE.md
.github: Updated PULL_REQUEST_TEMPLATE.md
.github: Update ISSUE_TEMPLATE.md
Daniil Baturin (1):
tools: add a script for building a Debian package in one step.
David Lamparter (175):
build: non-recursive doc + parallel sphinx
build: non-recursive debianpkg
build: trigger fewer unneccessary clippy rebuilds
build: fix some oddities in solaris/
build: non-recursive solaris
build: -Werror does not belong in AM_CPPFLAGS
build: cache a few more results in ./configure
build: add warning when overwriting vars on "make"
build: improve python search pattern
build: add Makefile variable easy access
doc: html default off
doc: drop colspan/rowspan elements
isisd: silence SA warnings
lib, ldpd: fix SA warnings from TAILQ oddness
lib: fix SA warning in skiplist code
*: fix clang-6 SA warnings
bfdd: fix garbage "port" string
build: non-recursive bgpd & rfp
build: non-recursive vtysh
build: non-recursive tests
build: include helper Makefiles in dist
build: remove common.am
build: move vtysh & manpage listings to subdir.am
tests: properly locate files in builddir
build: use -export-dynamic
build: clean up protobuf build integration
build: make pkgconfig configure output useful
build: fix & clean up *SAN flags
*: fix config.h/zebra.h include order
*: cleanup .gitignore files
*: fix some solaris warnings
vtysh: make RPKI node non-conditional
build: use _POSIX_C_SOURCE
build: move RFPLDADD to bgpd/rfp-example/librfp
build: check {malloc,pthread}_np.h for *BSD
lib: make pthread_set[_]name_np test OS agnostic
*: fix some random warnings
ospf6d: remove extra struct in ospf6_lsa_handler
lib: early-include "config.h" in flex lexers
build: fix not building docs w/o sphinx
build: move SPHINXBUILD= to configure in rpm build
lib: whitespace/spelling fix
lib: remove frr_pthread->id
lib: remove unused frr_pthread_yield()
tools/checkpatch.pl: recognize _Atomic as modifier
tools/frr: use path settings from ./configure
build: add --enable-static-bin option
ospfd: fix symbol collision
lib: print version information in libfrr.so
lib: remove deprecated list_delete()/list_free()
*: list_delete_and_null() -> list_delete()
watchfrr, lib: cleanup & delay detaching
tools/frr: remove "watchfrr.started" hack
bgpd: fix missed info->path rename in snmp
lib: add libunwind support for backtraces
build: fix some escapes in configure.ac
build: try to use -D option for ar and ranlib
debianpkg: strip ancient/unused cruft
debianpkg: clean up dependencies
debianpkg: remove bad USE_* options, add WERROR
build: rewrite readline/curses check
ripd: fix list compare order
zebra: add comment about Linux ifdown handling
build: carry --with-pkg-extra-version into tarballs
build: work around automake wtf
build: make clean and dist consistent
build: add "redistclean" target
*: spelchek
build: crop excessive net-snmp library list
build: make rfptest and ospfclient "noinst"
redhat: remove @CONFDATE@ from spec
build: refuse non-working linking options
yang: embed models into binaries
yang: add .gitignore
topotests: change from "context" to "unified" diff
Revert "isisd lib ospfd pbrd python: fix empty init"
tools/frr: get rid of the bash array and "bB"
watchfrr: don't wait around pointlessly at startup
watchfrr: immediately try connecting after start
watchfrr: add status command
debian/tools: new init script
*: get rid of most daemons.conf references
vtysh: rework/straighten pager handling
tests: fix domainname dependency
build: fix reproducibility re. -fdebug-prefix-map
bgpd: re-add spelling error in JSON output
build: disable empty libfrrfpm_pb
lib: flip to ISC on hook & module code
*: remove all MIBs for DFSG compliance
doc: re-add copyright & license note
tools: add documentation URL on frr.service
tools/etc: remove cumulus user from vtysh.conf
tools/frrcommon.sh: actually create /run/frr
tools/frrcommon.sh: always start staticd
debianpkg: wrap & sort dependency lines in control
debianpkg: kill backports
tools: add new tarsource.sh helper
debianpkg: use better dependency for pythontools
debianpkg: remove bogus shlib:Depends on frr-dbg
debianpkg: create frr-snmp and frr-rpki-rtrlib
debianpkg: make frr-pythontools a "Recommends:"
debianpkg: use redistclean target
debianpkg: update to Debian Policy version 4.2.1
debianpkg: raise debhelper compat level to 9
debianpkg: ditch development-only files
debianpkg: modernise dh_missing and use fail mode
debianpkg: disable zeromq and FPM
debianpkg: always install /etc/init.d/frr
debianpkg: put frr-doc package in 'doc' section
debianpkg: install HTML docs, drop tools/
debianpkg: fix install for {frr,rfptest,ospfclient}
debianpkg: change frr-pythontools dep to python3
debianpkg: add watch file
debianpkg: add -0 to version
debianpkg: use set -e in maintscripts
debianpkg: update maintainer
debianpkg: drop superfluous control entries
debianpkg: fix whitespace
debianpkg: make URLs https
debianpkg: add & document lintian overrides
debianpkg: update debhelper dependency
debianpkg: update copyright file
debianpkg: rewrite description texts
debianpkg: include docs and register with doc-base
debianpkg: fix remaining lintian warnings
debianpkg: install libraries to /usr/lib64/frr
debianpkg: cut down unneeded bits
debianpkg: enable rtrlib by default
debianpkg: enable FPM (w/o protobuf)
debianpkg: restrict to linux-any
debianpkg: fill in changelog proper
debian: move changelog out of the way
debian: make package "official"
doc: drop deprecated Ubuntu 12.04 docs
debian: clean up debian/ directory for git build
debian: fix up for new initscripts
tools/tarsource.sh: create debian changelog
debian: cleanly split off from dist tarball
debian: don't install ssd & daemons.conf
doc/developer: document new Debian packaging
debian: flag as "no stop on upgrade"
debian: full & proper copyright file
debian: drop unused lintian overrides
tools/tarsource.sh: fix GZIP_ENV
debian: add python3-pytest build dependency
debian: chop down & rework maintainer scripts
debian: keep working nicely with split config
tools: update build-debian-package.sh
tools/tarsource.sh: keep version info on non-git
debian: rework autopkgtests
debian: fix dropping daemons.conf
watchfrr: don't wait forever at startup
tools: don't watch nonexistent daemons
debian/control: add python3-dev dependency
debian: add libyang-dev dependency
tools/tarsource.sh: support FRR as a git submodule
tools/tarsource.sh: deal with AC_INIT []
lib: don't disable "log file" on "log syslog"
build, lib/yang: bake in extensions if possible
build: fix a whole bunch of *FLAGS
lib: yang: use common yang_ctx_new_setup()
bgpd: make valgrind suppression more generic
doc: orange FRR theme
doc: document VTYSH_PAGER and "terminal paginate"
isisd: skip over deleted fragments
vtysh: fix pager compatibility handling
debian: extend comments on pre/postinst hooks
debian: remove bogus libjson0 dependency
debian: add missing Conflicts:
debian: fix autopkgtest
debian: update libyang dependency to >= 0.16.74
debian: remove superseded systemd lintian override
watchfrr: build in defaults for -r/-s/-k
doc: update for new daemons settings
tools: fix new init script wrt. multi-instance
Dinesh Dutt (1):
zebra: Let zebra know about bond and blond slave intf types
Dmitrii Turlupov (1):
ospf: unregister mpls-te inter-as only if mpls-te is enabled
Don Slice (18):
bgpd/ospfd: make bgp and ospf json response a bit more consistent
bgpd/ospfd: resolve warnings for bgp/ospf json commit
ospfd: fix more warnings with the bgp ospf json commit
bgpd: change conditional operators for bgp/ospf json changes
bgpd: convert from conditional operator to if-then for json changes
bgpd, ospfd, pimd, zebra: Convert more use_json locations to bool
bgpd: enable aggregation in evpn
bgpd: solve issue entering aggregate twice
bgpd: resolve change required in pull review for evpn aggregates
bgpd: allow nht registration on ipv6 link-local addresses
bgpd: add command to display update groups for l2vpn evpn
zebra: add json support to show evpn mac vni <num> mac <mac>
zebra: remove space from json string for show evpn mac vni <num> mac
<mac>
bgpd: make name of default vrf/bgp instance consistent
staticd: install static routes in a vrf when next-hop interface comes
up
staticd: remove stale header info in static_fixup_intf_nh
zebra: handle neighbor delete from kernel for ipv4 link-local
tools: stop frr-reload.py from trying to delete the vrf context
Donald Sharp (252):
lib: Use the actual string we want to limit '===' line to
ospf6d: Remove deprecated code after 1 year
lib: Add Aggregate Table and Aggregate_node
bgpd, ripngd: Convert to using new agg_table/route
lib: Move aggregate pointer into aggregate route/table
vtysh: Let staticd know about vrf sub-mode
staticd: Fix mixup in vrf translations
static: Put vty_frame around vrf output in staticd.
lib: Remove dead code
zebra: Fix RB-Tree storage comparison function for v6
lib: Add missing smux.h to `make distrib` results
zebra: Fix _route_entry_dump to handle nexthop family as appropriate
sharpd: Modify route install to allow v6 nexthops
doc: Update sharp documentation
bgpd: Convert zlog_warn to flog_warn for bgp_aspath.c and bgp_attr.c
bgpd: Convert bgp_dump.c to use flog_warn
bgpd: Convert zlog_warn to flog_warn for bgp_packet.c
bgpd: Convert bgp_network.c to use flog_warn
bgpd: Convert bgp_evpn.c to use flow_warn
bgpd: Modify bgp_label to use flog_warn
bgpd: convert bgp_nht.c to use flog_warn
bgpd: Convert bgp_open.c to use flog_warn
bgpd: Update bgp_updgrp_packet.c to use flog_warn
lib: Convert to flog_warn in agentx.c
lib: Convert to errors some issues in buffer.c
lib: Update zclient.c warn code
lib: Convert sockunion.c to use flog_err
lib: Convert sockopt.c to flog_err
lib: Convert stream.c to use new error code subsystem
lib: Convert libfrr.c to use new error code system
lib: Convert netns_linux.c to new error-code work
lib: Convert thread.c to use new error-code subsystem
lib: Convert network.c to use new error subsystem codes
lib: Convert privs.c to use new error-code subsystem
lib: Convert routemap.c to use new error-code subsystem
lib: Convert vty.c to use new error-code subsystem
lib: Convert sigevent.c to use new error-code-subsystem
lib: Convert vrf.c to use new error-code subsystem
lib: Modify zlog_warn to vty_out
ospfd: Cleanup some warnings that were not warnings
ospfd: Convert ospf_network.c to use error code subsystem
ospfd: Convert ospf_routemap.c to use error card subsystem
ospfd: Modify ospf_packet.c to use new error-cards subsystem
lib: Convert ospf_opaque.c to use the err-card system
ospfd: Add OSPF_WARN_OPAQUE_REGISTRATION
ospfd: Convert ospf_te.c to use new error-card subsystem
ospfd: Convert opsfd.c to use new error-code subysstem
ospfd: Modify ospf_ri.c to use new error-code subsystem
ospfd: Add OSPF_WARN_LSA_INSTALL_FAILURE error code
ospfd: Convert ospf_ext.c to use new error-code subsystem
ospfd: Modify ospf_abr.c to use new error-code subsystem
ospfd: Convert ospf_asbr.c to use error-codes subsystem
ospfd: Convert ospf_lsa.c to use new error-card Syntax
ospfd: Fix warn -> debug for neighbor add
ospf_nsm.c: Convert warn->err and use error-code
ospfd: Convert ospf_ri to use error-code subsystem
ospfd: Modify ospf_spf.c to use error-card subsystem
ospfd: Convert ospf_sr.c to use error-card subsystem.
zebra: Modify nexthop checks to report inactive a bit more
staticd: Fix 'show debug static" command
sharpd: Fix missing 'show debug' command
lib: Cleanup include of link.h
lib: Detect if pthread_condattr_setclock is available
vtysh: Add code to isolate append_history
vtysh: Actually make the new_completion function match
doc: Fixup to use consistent frrvty group name
bgpd: Honor origin change in bgp aggregates
bgpd: Prevent possible crash when parsing v6 attributes
bgpd: Using no bgp fast-external-failover prevents vrf intf moves
doc: Update docs to mention 'no bgp fast-external-failover'
lib: Add thread_execute_name
lib, pimd: Convert timer_wheel to use thread_execute_name
staticd: Allow table_id to be a distinguisher for installation
zebra: Print out netlink message type instead of number
zebra: Newer kernels send data about mroute changes
zebra: Add some additional vrf debug for retrieving mroute info
zebra: Send correct default vrf tableid for MROUTE stats
pimd: Actually create vif's in non-integrated config
pimd: use bool instead of int to pass true/false
zebra: Cleanup comments to appropriately match style
bgpd: Extend RFC 5549 metaphor a bit more
doc: Update documentation with the extended-nexthop bgp command
zebra: Abstract mac neigh installation into it's own function
zebra: Trust the mac address received in some situations
zebra: Use actual memory type for zebra info pointer
pimd: Add some extra information to a show command
pimd: Add a debug to tell why we are not creating upsteam state
pimd: blackhole traffic when we are not DR for Stream received
bgpd: Make `struct bgp_addr` a private data structure
bgpd: Replace refcount with list of ifp names
lib: Allow useful display of default vrf name
eigrpd: Fix eigrp crash on shut of a interface
Revert "lib: Ensure FRR detects running of the second instance of a
FRR daemon, doesnot allow it to run."
lib: When we can't lock the pid file provide a meaningfull message
bgpd: Abstract aggregate retrieving/setting from info pointer
bgpd: Abstract distance retrieving/setting from info pointer
bgpd: Abstract bgp_static retrieving/setting from info pointer
bgpd: Abstract bgp_connected_ref retrieving/setting from info pointer
bgpd: Abstract bgp_nexthop_cache retrieving/setting from info pointer
pimd: Why was pim including zebra headers?
bgpd, lib, zebra: Wrapper get/set of table->info pointer
eigrpd: Fix memory leaks and remove dead/unused functions
pimd: Fix several address sanitizer issues
watchfrr: Modify some stderr messages to zlog_warn
lib: Allow some usage statistics for route-maps
bgpd: Don't necessarily ignore interface callbacks
lua: Initial Lua import
bgpd: Add lua match command
bgpd: Try to notice when configuration changes during startup
bgpd: prevent uninited variable from being used.
lib: Include compiler.h as early as is possible in the build
zebra: Cleanup unused file
bgpd: Add ability to dump the bgp peerhash
bgpd: Cleanup peer->su handling
bgpd: Do a bit better job of tracking the bgp->peerhash
bgpd: Rename some BGP_PATH_XXX to BGP_PATH_SHOW_XXX
bgpd: Convert BGP_INFO_XXX to BGP_PATH_XXX
bgpd: Convert `struct bgp_info` to `struct bgp_path_info`
bgpd: Convert all bgp_info_XXX functions to bgp_path_XXX functions
bgpd: Convert binfo to path
bgpd: Rename various variable names to something more appropriate
bgpd: Cleanup warnings issued by CI system from these changes
bgpd: Use a more appropriate memory type for a string
bgpd: Cleanup memory leak with the martian address intf string
lib, vtysh: Allow notification across multiple lines of failure
lib, zebra: Allow the specification of BUM flooding
bgpd: Add '[no] flood <disable|head-end-replication>'
vtysh: Add some missing daemons to some commands in vtysh
bgpd: The l2vni list compare function does not sort
bgpd: Ensure that evpn_vtep_ip_cmp actually returns useful data
bgpd: Add extended community to aggregates
bgpd: Add Large community support to aggregate routes
bgpd: Add a better breadcrumb for interface based peers
bgpd: Fix crash when using v4 route w/ v6 nexthop
bgpd: Cleanup bnch_nexthop_cache_reset to fit cleaner
zebra: Add some missing breadcrumbs
*: Fixup to use proper list_cmp functions
*: Replace hash_cmp function return value to a bool
bgpd: Prep commit to cleanup indentation
bgpd: Dissallow v6 routes from setting a v4 nexthop
ospfd: Do not allow thread drop
bgpd: When displaying default originate debugs don't print gibberish
Revert "bgpd: Make sure default-originate works without route-map as
well"
Revert "bgpd: Set attributes according route-maps if applied for
default-originate"
zebra: Start breakup of zns into zrouter and zns
zebra: Move rules_hash to zrouter
zebra: Move ipset_hash, ipset_entry_hash and iptable_hash into zrouter
zebra: Remove _wrap_script from hook names
zebra: Move rtadv to zebra_router
zebra: Notice when a route fails to install on *bsd
vtysh: Allow eigrp and rip access to keychain.c config
eigrpd: Convert keychain authentication to DEFPY
eigrpd: Fix bandwidth command to actually read input properly
lib: If command was successful don't store the command as an error
bgpd, lib, vtysh, zebra: Convert to using CMD_VNI_RANGE
zebra: Add counting to nexthop register/unregister events
bgpd: Add some debugs to note when we are not talking to zebra
bgpd: Allow registration of nexthops after zebra connection
pimd: *bsd needs priviledge escalation to init PIM
pimd: Send 1 on all systems for MRT_INIT
lib, zebra: Encode nexthop vrf in nht updates
pimd, zebra: Encode nexthop vrf in message
zebra: Add `match ipv6 address WORD` as a legal option
zebra: Carry onlink if set from resolving nexthop
bgpd: Late registration of Extended Nexthop should allow RA's to
happen
*: Replace zclient_new with zclient_new_notify
zebra: Remove uncompiled file
pimd: Add some debugs for when local membership fails
pimd: When we fail to initiate ifchannel backout work done
zebra: Fix privs elevation
bgpd: Cleanup weird includes of zebra headers
bgpd: Reduce size of 'struct bgp_node' by 8 bytes
bgpd: Abstract bgp_info retrieving/setting from info pointer
bgpd: Abstract bgp_table retrieving/setting from info pointer
bgpd: Fix missed usage of bgp_static_get_node_info()
bgpd: Cleanup bgp_route_map_process_update to be readable
bgpd: Cleanup show_adj_route_vpn to be easier to read
bgpd: Cleanup non-usage of prefix2str in bgp_vpn.c
bgpd: Cleanup bgp_nexthop_set|get function names
bgpd: Cleanup bgp_aggregate_set|get function names
bgpd: Cleanup bgp_static_set|get function names
bgpd: Cleanup bgp_distance_set|get function names
bgpd: Cleanup bgp_connected_set|get function names
vtysh: Don't attempt to reconnect the non-instanced ospf process
tests: Exclude topotests from consideration
Update Readme to have correct ordering for frr user
lib: Fix kernel version parsing
Fix tests to handle new output
Spell Verifying correctly
Actually fix version comparison
Allow topotests to work with eigrp and nhrp
Add a basic EIGRP topology.
Exclude eigrp test from running normally yet
Basic EIGRP topo test working
eigrp-topo1: Correct eigrp test results.
bgp_l3vpn_to_bgp_vrf: Fixup topo test to write log files to same
location at start of run
lib: Always attempt to set mpls platform_labels
Clean up deprecated usage of router-id
Add a tiny breadcrumb to hopefully help end user
topotests: Add ospf-sr-topo1 back in
zebra: Always resend nexthop information when registered
lib: Cleanup nexthop2str code to be consistent
zebra: `show ip route A.B.C.D json` would only show last route entry
bgpd: Convert adj_out to a RB tree
bgpd: Back out rest of e23b9ef6d2
zebra: Convert nexthop_active functions to use bool
topotests: Add a basic route leak vrf test
zebra: For rnh handling use actual resolved nexthop
zebra: Remove rib_lookup_ipv4_route
zebra: Make v4 and v6 code paths for rib_XXX calls in kernel_socket
the same
lib: Fix string size issue with clang
lib, zebra: Remove ZEBRA_FLAG_STATIC
lib: Remove unused ZEBRA_FLAG_SCOPE_LINK
lib: Reorder Zebra message flags and document
bgpd: Cleanup non-normal compiled code path
zebra: Allow zebra to only mark up to multipath_num nexthops as ACTIVE
zebra: On route removal failure return proper message
topotests: Cleanup diagnose_env to allow thought about multi-platforms
topotests: Start abstraction of module_present for other platforms
bgpd: Fix confederation identifier unsigned display
topotests: module_present should return a True/False
topotests: Allow sharpd to be used in topotests
topotests: Make 'LinuxRouter' a class of 'Router'
topotests: Move linux specific config into Linux config section
topotests: add FreeBSDRouter abstraction
zebra: Allow ns delete to happen after under/over flow checks
bgpd: Allow 'no set community`
bgpd: Allow `no set extcommunity [rt|soo]`
bgpd: Allow shortened 'no set large-community' and 'no set
large-comm-list'
zebra: Convert socket interface to use `union sockunion`
zebra: Move sin6_masklen to earlier in the file
zebra: Refactor kernel_socket kernel_rtm_ipv4 and ipv6 functions
zebra: Refactor kernel_rtm to be a bit smarter about how it handles
options
zebra: The mask and sin_mask are a bit redundant for kernel_rtm
zebra: Convert gate in kernel_rtm to a bool
zebra: Make label processing guaranteed to be unique
zebra: Fixup spaces/tabs issue found by CI in rt_socket.c
staticd: Do not ready prefix for printing till it's decoded
eigrpd: Write eigrp config even if no network statements yet
eigrpd: eigrp usage of uint32_t to struct in_addr for router_id data
eigrpd: Allow eigrp to set/unset the router-id as a value.
sharp: Modify route install to take nexthop groups
sharpd/vtysh: Allow sharpd to use nexthop-groups
sharpd: Allow sharpd to accept nexthop group as part of route install
bgpd: Do not send a label to zebra that it doesn't understand
lib: On frr_pthread_new save a os_name
lib: Cleanup thread name setting to happen at start
lib, bgpd: Convert frr_pthread_set_name to only cause it to set os
name of the thread
lib: Convert RUSAGE_SELF to RUSAGE_THREAD where we can
bfdd: Fix timer print-out function
zebra: Fix use after free in rib_process_result
ospfd: Allow pre-existing vrf's to work
Donatas Abraitis (9):
bgpd: Validate as-path access-list before continuing regarding invalid
chars
plist: Add safety check to avoid going over 4294967295 for prefix-list
osfpd: Install default route after second try instantly
bgpd: Match routes by type under route-maps
bgpd: Check if route-map really exists before applying to the peer
bgpd: Select default routing table when importing VRF routes into
global
bgpd: Optionally remove AS number when using `no set as-path exclude`
bgpd: Remove community-list by name without typing full rule
bgpd: Remove extcommunity-list by name without typing full rule
Emanuele Di Pascale (66):
lib: fix fetching enum values for derived types
lib: add NB phase-specific error codes
lib: copy xpaths when enqueing changes
lib: fix issue with yang_str2enum
isisd, yang: add configuration model and callback stubs
isisd: retrofit 'router isis' and 'ip router isis' cmds
isisd: retrofit the 'net' command
isisd: retrofit the 'is-type' command
isisd: retrofit the 'dynamic-hostname' command
isisd: retrofit 'set-overload-bit' and 'set-attached-bit' cmds
isisd: retrofit the 'metric-style' command
isisd: retrofit the 'area-password' and 'domain-password' cmds
isisd: retrofit the 'lsp-gen-interval' command
isisd: retrofit the 'lsp-refresh-interval' command
isisd: retrofit the 'max-lsp-lifetime' command
isisd: retrofit the 'lsp-mtu' command
isisd: retrofit the 'spf-interval' command
isisd: retrofit the 'spf-delay-ietf' command
isisd: retrofit the 'purge-originator' command
isisd: retrofit the mpls-te commands
isisd: retrofit the 'default-originate' command
isisd: retrofit the 'redistribute' command
isisd: retrofit the 'topology' command
isisd: retrofit the 'isis passive' command
isisd: retrofit the 'isis password' command
isisd: retrofit the 'isis metric' command
isisd: retrofit the 'isis hello-interval' command
isisd: retrofit the 'isis hello-multiplier' command
isisd: retrofit the 'isis three-way-handshake' command
isisd: retrofit the 'isis hello-padding' command
isisd: retrofit the 'isis [c|p]snp-interval' commands
isisd: retrofit the 'isis topology' command
isisd: retrofit the 'isis circuit-type' command
isisd: retrofit the 'isis network' command
isisd: retrofit the 'isis priority' command
isisd: retrofit the 'log-adjacency-changes' command
isisd: modify config_write funcs to use the northbound
isisd: implement the 'database-overload' notification
isisd: implement the 'lsp-too-large' notification
isisd: implement the 'if-state-change' notification
isisd: implement the 'corrupted-lsp-detected' notification
isisd: implement the 'attempt-to-exceed-max-sequence' notification
isisd: implement 'max-area-addresses-mismatch' notification
isisd: implement the authentication failure notifications
isisd: implement the 'adjacency-state-change' notification
isisd: implement the 'rejected-adjacency' notification
isisd: implement the 'area-mismatch' notification
isisd: implement the 'lsp-received' notification
isisd: implement the 'lsp-generation' notification
isisd: implement the 'id-len-mismatch' notification
isisd: implement the 'version-skew' notification
isisd: add the 'lsp-error-detected' notification
isisd: implemented the 'sequence-number-skipped' notification
isisd: implemented the 'own-lsp-purge' notification
isisd: embed the isisd yang model
isisd, yang: change type empty leafs to booleans
isisd: implement sighup handler
lib: add frr-isisd to the native models
isisd: retrieve default values from the yang model
isisd: fix 'no router isis' on candidate config
isisd: formatting fixes in isis_cli.c
isisd, yang: set default network-type to broadcast
isisd: suppress maybe uninitialized warnings
isisd: fix point-to-point network type config
ospfd: fix no virtual-link cmd
lib: add hooks for external logging function
F. Aragon (36):
lib: array index check (Coverity 1473088)
lib vtysh zebra: variable shadowing fixes
pimd ripd ripngd: variable shadowing fixes
bgpd isisd ospf6d ospfd: variable shadowing fixes
nhrpd: missing operand added
bgpd lib ospf6d pbrd tests zebra: shadowing fixes
bgpd: type fix
bgpd isisd zebra: misuse of comma operator
build: add -Wshadow to the dev build
bgpd isisd ldpd lib: const drop fixes (SA)
zebra: filter zebra messages (label manager)
bgpd: fix test (using bgp instance 0)
isisd: null check (Coverity 1473285)
tools: null check (Coverity 1399484)
tools: return check (Coverity 1399196)
zebra: redeclaration fix (SA)
lib: redundant parentheses (SA)
bgpd: null check (Coverity 1472965 1472966)
zebra: dead code (Coverity 1473593)
isisd: out of bounds access (Coverity 1473286)
ospfd: dead code (Coverity 1472227)
bfdd zebra: dead code (Coverity 1472624 1473199)
lib: RB-tree copy-paste error (Coverity 1446184)
ospf6d: null check (Coverity 1221441)
ospfd: dead code (Coverity 1302499)
eigrpd: dead code (Coverity 1460436)
ospf6d: dead code (Coverity 1399231)
zebra: dead code (Coverity 1465497)
isisd: null check (Coverity 1424529)
zebra: netlink socket check (Coverity 1472236)
bgpd: fix resource leak (Coverity 1475489)
bgpd: null check (Coverity 1475469)
bgpd isisd lib: fix return on void functions
isisd lib ospfd pbrd python: fix empty init
sharpd: return check (Coverity 1475198)
pbrd: return check (Coverity 1475199)
G. Paul Ziemba (22):
bgp vpn-vrf leaking: partial changes toward using new functionality
lib: bgprib utility to compare rib against list of required routes
lutil: expose result method
bgp_l3vpn_to_bgp_vrf: updated config files to current vpn-policy
syntax
lib/bgprib.py naming rib->bgprib is more accurate
bgp_l3vpn_to_bgp_vrf: check_routes test now uses bgprib for exact
route checking
bgp_l3vpn_to_bgp_vrf: comment out route-add commands no longer needed
bgp_l3vpn_to_bgp_vrf: assign different RDs to customers on r4
ltemplate.py: remove dependency on hard-coded router name r2
ltemplate.py: start isisd when isisd.conf present
test_bgp_l3vpn_to_bgp_vrf: small config comment cleanup
test_bgp_l3vpn_to_bgp_vrf: match new nexthop=0 code
lib/ltemplate.py: add KeepGoing parameter to ltemplateTest
lib/bgprib.py: handle empty json results gracefully
bgp_l3vpn_to_bgp_vrf: update to current vpn-vrf leak syntax and
behavior
bgp_l3vpn_to_bgp_vrf: require frr 4.1
lib: lutil matching without changing newlines
lib/bgprib.py: add copyright notice
bgp_l3vpn_to_bgp_vrf: check_linux_mpls: delete obsolete code;
formatting
bgp_l3vpn_to_bgp_vrf: use FRR PR #2053
bgp: tolerate route-table-show header changes of PR 2045
bgp_multiview_topo1: more fixes for header changes of PR 2045
Kishore Aramalla (2):
bgpd: BGP daemon crashed when a L2VNI is unconfigured
bgpd: The default IP route not advertised with configured RD
Lakshman Krishnamoorthy (1):
bgpd: Route Server support for evpn address-family Signed-off-by:
Lakshman Krishnamoorthy lkrishnamoor(a)vmware.com
Liam McBirnie (1):
Revert "redhat: don't Requires initscript on systemd based distros"
Lou Berger (113):
rfapi: debug related changes to support topotest
lib: qmem show changes (header and max) add header to show qmem,
align table with headers add tracking of max # allocs and max
bytes alloc'ed
lib: atomic_add_fetch_explicit not supported on all platforms
rfp_example: add rfp holddown-factor to support topotest
doc: add comment on PR title and description
doc: add comment on closing PRs
rfapi: debug related changes to support topotest -- add cost
rfp_example: add 'rfp full-table-download' config to support topotest
configure.ac: add --with-yangmodelsdir=DIR and
--with-libyang-pluginsdir=DIR config options
doc: add info on libyang install and configure options
bgpd: add valgrind suppression file for to ignore libyang per dll
memory leak
lib: speed up router shutdown stopRouter: report when a process is
being killed only sleep if actually killed a process add option to
not sleep or conduct -7 kill topogen stop: add wait parameter
(defaults to old/wait) when stopping routers, first stop all without
waiting then do a second pass where will wait if needed
lutil: initial version
bgp_direct_to_bgp_vpn: initial version
bgp_direct_to_bgp_vpn: convert to new template, skip tests on pre-3.1
versions
lib: lutil cleanup move utilities/lutil.py -> lib/lutil.py add:
luShowFail, CallOnFail, luStart parameter to set log dir change
default wait to 10sec
bgp_direct_to_bgp_vpn: general cleanup use moved lutil.py improve
error information adjust to new luCommand default timeout sdd
support for CliOnFail, remove no_test_call_mininet_cli scripts -
update to correct stable values use topo test's log dir
bgp_direct_to_bgp_vpn: add some progress output
bgp_direct_to_bgp_vpn: scripts - avoid race condition, and test for
predicable results
lib: lutil - make requested error logging change
lib: lutil - make it easier to spot command output and null output
lib: add LabN testing template
bgp_direct_to_bgp_vpn: convert to lib/ltemplate
bgp_direct_to_bgp_vpn: enable mpls forwarding, add more details on
adjacencies
bgp_l3vpn_to_bgp_direct: rename bgp_direct_to_bgp_vpn Rename BGP L3VPN
test to have L3VPN at start of test name Also remove
unused/pre-ltemplate files
bgp_l3vpn_to_bgp_direct: fix hook routines for ltemplate
lib: ltemplate - fix handling of CallOnFail
lib: ltemplate - fix handling of CallOnFail (take 2)
lib: add router.has_mpls check
bgp_l3vpn_to_bgp_direct: skip tests when mpls not available
bgp_l3vpn_to_bgp_direct: 2nd try at skipping tests when MPLS not
available
bgp_l3vpn_to_bgp_vrf: clone bgp_l3vpn_to_bgp_direct as starting point
bgp_l3vpn_to_bgp_vrf: in progress version Adjacenies up, MPLS
configured on interfaces -- right now provides testbed for code
changes
bgp_l3vpn_to_bgp_vrf: add ce4 off of r4 for inter-vrf route leaking
bgp_l3vpn_to_bgp_vrf: don't set vrf-policy, wait for new format
bgp_l3vpn_to_bgp_vrf: just test adjacencies now - for dev/integration
lib: scope life of Lutil and _lt to a single test run reorg to support
regression environment
bgp_l3vpn_to_bgp_xxx: avoid collision of customize.py match lutil and
ltemplate changes
lib: ltemplate simplify start/stop
bgp_l3vpn_to_bgp_xxx: match ltemplate start/stop changes
bgp_l3vpn_to_bgp_direct: add basic data path checks prior to adjacency
check
bgp_l3vpn_to_bgp_vrf: add basic data path checks prior to adjacency
check
bgp_l3vpn_to_bgp_vrf: allow for some ping loss
bgp_l3vpn_to_bgp_direct: allow for some ping loss
lib: add luLast to get last found luCommand regex match
lib: add script name to summary output
bgp_l3vpn_to_bgp_vrf: skip tests when mpls not available
bgp_l3vpn_to_bgp_vrf: 2nd try at skipping tests when MPLS not
available
lib: add tgen level mpls init and hasmpls flag
bgp_l3vpn_to_bgp_vrf: use tgen.hasmpls flag
bgp_l3vpn_to_bgp_vrf: add kernel check (>=4.9)
bgp_l3vpn_to_bgp_vrf: collect iproute2 package into
bgp_l3vpn_to_bgp_vrf: catch linux setup failures
bgp_l3vpn_to_bgp_direct: use tgen.hasmpls flag
isis-topo1: allow up to 90 sec for convergence
bgp_l3vpn_to_bgp_vrf: add testing for manually setup MPLS path (until
have dynamic)
bgp_l3vpn_to_bgp_vrf: skip mpls vrf ping tests when have old iproute2
bgp_l3vpn_to_bgp_vrf: prepend rtr name to vrf name, per Philippe
bgp_l3vpn_to_bgp_vrf: add test to check linux vrf info
bgp_l3vpn_to_bgp_vrf: required 4.11 kernel on arm processors
bgp_l3vpn_to_bgp_vrf: centralize iproute2 check, add checks to
appropriate tests
lib: ltemplate add common ltemplateRtrCmd and ltemplateVersionCheck
bgp_l3vpn_to_bgp_vrf: use new ltemplate common functions
bgp_l3vpn_to_bgp_direct: use new ltemplate common functions
lib: lutil - fix test counting, add returnJson flag
bgp_l3vpn_to_bgp_vrf: fix route set on non-vrf interface (thanks ben!)
bgp_vrf_netns: allow more time for adjacency to come up, report
unexpected output
lib: TopoExaBGP.start - report unexpected exabgp output
bgp_vrf_netns: attempt cleanup of previous test abnormal exit. skip
test if setup fails
lib: fix path the led to group_nl_converted being referenced when not
set
bgp_l3vpn_to_bgp_vrf: remote static routes left over from old test
versions
lib: lutil - fix test numbering, add test number to command logging
bgp_l3vpn_to_bgp_vrf: fix wrong table entries
bgp_l3vpn_to_bgp_vrf: more pings...
lib: convert to directories per node
lib: add check for core and memory issues after routerstop
lib: limit checkRouterCores output to once per router start
*: convert startup logs to use per node directories also have startup
and running log files match
GUIDELINES.md: update to reflect per node log dirs
lib: log to start/local (per node) dir, log commands
lib: use per node log directory when topotest is used without topogen
lib: allow all rw access to /tmp/topotests (for package support and
debug)
lib: bgprib - get human readable verson of json commands for log
lib: collect shutdown errors, add assert on single router shutdown
lib: collect and report shutdown errors across whole topology
lib: add and use Router.checkRouterVersion (based on bdpd version)
lib: don't assert on shutdown errors in rel < 5.0
lib: don't report cores on exit as asserts in 5.0
lib: more logging to aid in failure debugging
bgp_l3vpn_to_bgp_vrf: allow some time for updates to propogate
bgp_l3vpn_to_bgp_vrf: use l3mdev_accept workaround for known kernel
bug
bgp_l3vpn_to_bgp_direct: imports and more debug Allow for different
timings on, and number of, import processing Collect more info for
debugging
lib: speedup test exit when startup fails
bgp_l3vpn_to_bgp_vrf: ignore output of sysctl, reenables test!
bgp_l3vpn_to_bgp_vrf: allow for long adjancies, seen with
l3mdev_accept=1
bgp_rfapi_basic_sanity: added basic rfapi sanity topotest
bgp_rfapi_basic_sanity: address PR comments (copyright, switch)
bgp_rfapi_basic_sanity: added close check
bgp_rfapi_basic_sanity: added check_timeout (uses FRR PR#2934)
bgp_rfapi_basic_sanity: wait for clean exit
bgp_rfapi_basic_sanity: added multi-path and updated responses
bgp_rfapi_basic_sanity: added cost to 2nd MP route
bgp_rfapi_basic_sanity: added multi-path to timeout test
bgp_rfapi_basic_sanity: added query only NVE
bgp_rfapi_basic_sanity_config2: added rfapi test with partial table
download This is identical to bgp_rfapi_basic_sanity with the
exception of non-default config
bgp_rfapi_basic_sanity_config2: allow for slow CI
bgpd: partially revert e23b9ef6d271223d29c7f91a10d98aa6dcd252b3
previous change was to fix rnh module in Zebra for leaked routes
this reverts that fix, so probably reintroduces the problem.
topotest: remove sleep on staticd startup
topotests/lib: help script writers understand wrong VRF failure
topotest: bgp_l3vpn_to_bgp_vrf put ce4 into vrf (without a default)
bgpd: don't use BGP_ATTR_VNC(255) unless ENABLE_BGP_VNC_ATTR is
defined
bgp_rfapi_basic_sanity: delayed timeouts not supported without VNC
attr
bgp_rfapi_basic_sanity_config2: delayed timeouts not supported without
VNC attr
Marcel Röthke (2):
bgpd: fix "show rpki cache-server" for ssh caches
bgpd: fix crash when trying to remove non-existing rpki cache
Mark Stapp (51):
libs: add atomic xxx_and_fetch apis
libs: fix missing atomics for some gcc versions
lib: fix use of frrpthread os_name
zebra: Create zebra_dplane.c and .h
zebra: Start abstraction of zebra_dplane_info for context passing
zebra: add 'debug dplane' support and cli
zebra: fix debug dplane cli
zebra: start dataplane layer work
zebra: wip: early version of dplane result handler
zebra: update dplane route api return type
zebra: use async dplane route updates
zebra: capture old data for route delete
zebra: set SELECTED flag in rib_process
zebra: start sketching dataplane provider api
zebra: resolve style issues in dplane commit
zebra: ensure redist of system routes
zebra: Fix style issues
zebra: netlink fuzzing path correction
zebra: add shutdown callback for dplane providers
zebra: update routing socket path
zebra: add dplane show commands
zebra: add handy res2str utility
zebra: support zebra shutdown and cleanup
zebra: remove old apis after new dplane work
zebra: revise struct names to resolve review comments
zebra: limit queued route updates
zebra: improve safety of netns_notify_close()
zebra: rebase dataplane, align with master
zebra: only perform shutdown signal processing once
zebra: only uninstall once, when closing rib table
zebra: temporary workaround for a clang issue with atomics
zebra: Fix netlink installation of recursive ecmp routes
libs: rename two id_alloc macros to resolve bsd conflict
zebra: introduce dedicated dataplane pthread
zebra: fix get_old_instance api
zebra: dataplane provider enhancements
zebra: reorg dataplane pthread start
zebra: add initial error handling to dplane loop
zebra: revise dplane dequeue api
zebra: improve dataplane shutdown checks
zebra: dplane lock and thread_master apis
zebra: separate netlink socket for dataplane
zebra: add dataplane routing socket
isis-topo1: make isis topology match .dot file
lib,bgpd: remove deprecated stream lib macros
zebra: make incoming zserv message-processing a singleton event
libs: support timeout for workqueue retries
zebra: use a small retry timeout for the rib workqueue
zebra: include lib/queue.h in zebra dataplane
zebra: reduce rib workqueue retry timeout
zebra: unlock route-node when processing dplane results
Martin Winter (114):
configure: Update version to 6.1-dev
redhat: Add fabricd to RPM package
bgpd: Fix for large AS paths which are split into segments
redhat: Added libyang dependencies to package
debianpkg: Add yang files to packages
debianpkg: fix lintian warn: No need to keep .la libs for packages
Initial commit with first OSPFv6 Topology Test
Cleanup README and a reference to License
ospf6-test1: Look for test config in directories relative to main
script location
ospf6-test1: Renamed testscript to have test_ prefix for pytest
discovery
Renamed Test Directory: ospf6-test1 -> ospf6_topo1
test_ospf6_topo1: Restructure to run under pytest
Add .gitignore
ospf6-topo1: Cleanup log messages
ospf6-topo1: Less chatty timeout messages during convergence
ospf6-topo1: Code cleanup
bgp_multiview_topo1: Add "bgp multiview" simple topology to test.
Initial commit
bgp_multiview_topo1: Skip remaining on fatal error and try to get more
crash info of daemon is not running
Update Documentation
example-test: Add simple example pytest for documentation (and exclude
it from running in pytest.ini)
bgp_multiview_topo1: Rename received bgp route log with .log for easy
clean between runs
bgp_multiview_topo1: Fix limit to create coredumps on quagga crashes
bgp_multiview_topo1: Added Network Diagram as comment
ospf6-topo1: Enable coredumps for Quagga Daemons and add logic to skip
remaining test in case of fatal error
ospf6-topo1: Add check for Linux Kernel Routing Table as well and
change to better human readable context diff
bgp_multiview_topo1: Change from unified to context diff for better
readability
README: Add example configure statement for building test quagga code
bgp_multiview_topo1: Add Markdown doc for test
bgp_multiview_topo1: Rename test_description.md to README.md for
automatic rendering in online git
ospf6-topo1: Add Markdown doc with testdescription
change in checkRunning: Check all daemons on all nodes before aborting
with an assert
Add support for FRR in addition to Quagga
bgp_multiview_topo1: Fix bad check for running daemons
ldp-topo1: Add new LDP Topology Test
Move common function and class to topotest library
Added optional output for memleaks at the end of test. Enable them by
setting the environment variable TOPOTESTS_CHECK_STDERR to some
value
bgp_multiview_topo1: Mask out BGP Table version in comparison
Update Readme to reflect FreeRangeRouting name
ldp-topo1: Delete accidentally include tar file
ldp-topo1: Fix ordering of reference output to check against
Fix README incorrect reference to Quagga
LDP-Topo1: Update test to accept new format of LDP output
bgp_multiview_topo1: Fix case of tests hanging if convergence is not
successful.
topotest library: Fix creation of /etc/XXX/vtysh.conf
ripng_topo1: Adding new test for RIPng Topology
rip_topo1: Adding new test for RIPv2 Topology
Update FreeRangeRouting -> FRRouting name
lib: Add function to check for daemon available (i.e. LDPd) and
function to return typ (quagga or frr)
all-protocol-startup: Add test suite which runs all protocols at once
and verifies startup and spurious errors of each
ripng-topo1: Fix duplicate IP (Thanks Renato!) and documentation typos
all-protocol-startup: Add option to skip currently broken checks and
relax BGP check
all-protocol-startup: Fix pref commit - bamboo prefix is lower case
all-protocol-startup: Fix bad assert in case of failed vtysh output
test
ospf6-topo1: Update to ignore the proto type in linux kernel table
lib: Fix version check in previous kernel compare
lib: Fix another typo on kernel compare
Fix memory leak detection and reporting which accidentally was dropped
a month ago
ldp-topo1: Adjust to accept new format in "show ip route" as
introduced with PR 495 (extra comma)
Add support for collecting AddressSanitizer output. See README.md for
details
Doc: Update manual sample build instruction with symlink for vtysh and
reference to user creation
lib: Move updated topotest.py lib with AddressSanitizer to correct
directory (fix mistake from 2 commits ago)
lib: Add different failure comment on processes killed by
AddressSanitizer
(all tests): Add extra check to make sure daemons are still running
after each essential stage.
rip-topo1: Add check to make sure daemons are still running between
essential tests
lib: Send Output error from AddressSanitizer to StdErr
lib: Move AddressSanitizer check to separate procedure and add check
for errors in vtysh itself as part of checkRouterRunning
lib: cleanup diff text output formatting issue and move to library
ospf6_topo1: Remove ff00:/8 routes from Linux Table compare
lib: Fix stopRouter not to fail for case if daemon was never started
all_protocol_startup: More tolerant on interface MTU output
Doc: Update README to specify ExaBGP version as 4.0 is not yet
supported
ldp-topo1: Make the implicit label optional to pass old frr code as
well
ospf-topo: Mask IPv6 local-addressess instead of removing them
bgp-ecmp-topo1: Add BGP Topology for rcmp testing
bgp-ecmp-topo1: Check number of routes received for convergence
ospf-topo1: Remove check for spfLastDurationMsecs value
lib: Add check for MPLS kernel modules to exist before trying LDP
tests
lib: Enhance daemon_available() function to check for mpls modules in
case of LDPd
lib: add check for mpls kernel modules to diagnose_env()
lib: Change topology to output INFO and DEBUG to stdout and other
levels to stderr
ldp-topo1: Use 'label implicit-null' for implicit labels
lib: check for eigrpd available and return warning if missing instead
of failing
Enable eigrp-topo1
multiple_topos: Don't report about StdErr Output if there is no output
lib: Use SIGTERM for killing daemons first and only SIGBUS (7) if the
daemons fail to exit.
all-protocol-starup: Fix triple-output of same vtysh stderr/stdout
messages.
eigrp-topo1: Change Route verification to use json
eigrp-topo1: Cleanup leftover comments from previous commit
all-protocol-startup/isis: Fix check for "show isis interface" to
allow different circuit ids than 1
eigrp-topo1: Remove check for EIGRP distance
Fix output to allow it on generic Debian
ldp-vpls-topo1: Allow ospf neighbor json command with list (new) and
dict (old)
bgp-ecmp-topo1: Workaround for version check
ospf-topo1: Add IPv6 addresses to diagram
ospf-topo1: Allow IPv6 ECMP version to pass
ldp-vpls-topo1: new format for ospf neighbor json
ldp-topo1: Support implicit-null and old format on "show_mpls_table"
Revert previous 2 commits (pushed by mistake)
lib: Add support for staticd
lib: Fix staticd extension
lib: Add support for Ubuntu 18.04 with installed FRR package
lib: checkRouterVersion to determine version
pick ospf6 router-id syntax based on version
doc: Fix path and order in debian package build doc
debian: Don't create homdirectory for frr user
snapcraft: Update RTRLIB to 0.6.3
snapcraft: Don't stage libc6
snapcraft: Add libyang to snap package
snapcraft: Add missing staticd.conf.default
snapcraft: Update bgpd to use newer rpki lib
snapcraft: Add FabricD to Snap package
snapcraft: Disable libyang CACHE for snap package (Temp workaround)
redhat: Require newer libyang (> 0.16.74) for embedded extensions
FRRouting Release 7.0
Mitch Skiba (2):
lib: Implement an allocator for 32 bit ID numbers
bgpd: Re-use TX Addpath IDs where possible
Naveen Thanikachalam (1):
lib: Trigger callbacks to re-evaluate route-map clauses when "call"
CLI is executed.
Nitin Soni (3):
zebra: Add "show evpn vni detail" command
zebra: Add "show evpn mac vni all detail" command
zebra: Add "show evpn arp-cache vni all detail" command
Olivier Dugeon (3):
OSPF: Add support to multi-area to Router Info.
Add OSPF Segment Routing tests
Update OSPF-SR tests to handle various version
Philippe Guibert (70):
zebra: when veth link is used across vrf, the link may not be good
lib: offer an API to get and set default vrf name
lib: autocomple vrf list authorises default vrf name
*: add a vrf update hook to be informed of the vrf name
zebra: detect if a netns is the default netns
bgpd: authorize default vrf name usage
ospfd: adaptations to handle vrf alias
bgpd: handle vrf aliases in vty API
lib: set default vrf name at startup
lib: protect newly created vrfs against default vrf naming.
lib: avoid default vrf name memory allocation at startup
doc: add information about dynamic update of default vrf name
zebra: add an option to zebra command to change default vrf name
lib: overwrite default vrf name upon zapi vrf add event
lib: remove spurious message when netns is not available
zebra: do not update link if interface is veth interface
doc: fix warning of doc compilation with bgp draft
bgpd: in case nexthop is ipv6, set nh attribute flag in mpls vpn case
bgpd: vpn route-map config should be kept, except if vrf list is on
doc: inform user that expanded communities can not be used in set mode
zebra: remove kernel routes that are suppressed
bgpd: fill in prefix for flowspec entry when json format is requested
ospfd: do not remove area structure, while vls are configured
lib: distribute-list ipv6 can be (un)configured
ospfd: permit reconfiguring network after area suppressed
ospf6d: add missing vty commands to ospf6 area command
bgpd: allow vrf validity and bgp vrf import/export, when zebra is off
doc: change workflow to support long term maintenance branches
lib, zebra: default vrf configured will not be overwritten by
discovery
zebra: delay default vrf name after vrf initialization
lib: zebra support for vrfwnetns parameter
bgp_vrf_netns: add basic test to support netns backend with netns
bgp_vrf_netns: do not run test on 32 bit linux machines
bgp_vrf_netns: increase bgp convergence timer
bgp_vrf_netns: revert changes from topotest 77
bgp_vrf_netns: swap the order of netns destruction
lib: topogen support for link_enable on other netns
ospf-topo1-vrf: setup with OSPF VRF
lib: add ip_route_zebra function
ospf-topo1-vrf: replace ip_route method with ip_route_zebra
lib: add zebra api to shutdown an interface
ospf-topo1-vrf: replace link_enable api with zebra topotest api
bgp-ecmp-topo1: change default vrf name
doc: add ldp information over transport connection
lib: do not convert ip prefixes without '.'
bgpd: add new draft for redirect ip for flowspec
bgpd: bgp pbr ignores bgp fs entries with 0.0.0.0 ips written.
bgpd: reuse bgp_path_info_extra_free() routing in rfapi
bgpd: delay destruction of label pool
ospfd: remove call to if_lookup_all_vrf
zebra: avoid initialising more than one the l3vni hash structure
doc: add a community rule to permit usage of GPLv3
bgpd: add show bgp import-check-table
zebra: add command show ip/ipv6 import-check table
bgpd: nexthop vrf name set to default vrf
bgpd: bgp default vrf in show route naming change
zebra: the default vrf name in vxlan is correctly set
lib: enforce vrf_name_to_id by returning default_vrf when name is null
lib, rip, ripng, babel, eigrp: add ctx pointer to distribute api
zebra: update local ns_id field
zebra: handle multiple events for netns deletion event
bgpd: flowspec redirect IP info is retrieved into nh tracking
zebra: start the netns notification mechanism after ns initialisation
zebra: do not create vrf if name already set to default vrf at startup
bgpd: detach vrf labels allocated, when removing bgp instance
bgpd: do not crash when removing ip vpn entries
ospf6d: unitialised buffer zone used by socket
ospf6d: closing server socket when leaving ospf6d
ospf6d: upon interface deletion, the area if list may be updated
ospf6d: reset the global ospf6 pointer
Quentin Young (67):
lib: sort route-maps for display
doc: rename building_frr_on* -> building_frr_for*
doc: name correct sphinx package under FreeBSD 11
doc: update misc build docs
doc: update subdir.am
zebra: remove invalid ref "frr-configuration"
doc: fix building.rst index
lib: add flog_warn
zebra: flog_warn conversion
*: style for flog_warn conversions
lib: PRIu32 in log.h
bgpd: remove duplicate log_ref_add()
zebra: fix includes
frr: remove stale files, allow non-GNU Automake
frr: improve README
frr: add README.md to EXTRA_DIST
bgpd: BGP_[WARN|ERR] -> EC_BGP
ospfd: OSPF_[ERR|WARN] -> EC_OSPF
nhrpd: NHRP_[ERR|WARN] -> EC_NHRP
babeld: BABEL_[ERR|WARN] -> EC_BABEL
eigrpd: EIGRP_[ERR|WARN] -> EC_EIGRP
isisd: ISIS_[ERR|WARN] -> EC_ISIS
pimd: PIM_[ERR|WARN] -> EC_PIM
ripd: RIP_[ERR|WARN] -> EC_RIP
watchfrr: WATCHFRR_[ERR|WARN] -> EC_WATCHFRR
zebra: ZEBRA_[ERR|WARN] -> EC_ZEBRA
*: LIB_[ERR|WARN] -> EC_LIB
*: style for EC replacements
doc: document CLI deprecation period length
ospfd: add docs on multi-instance ospf
doc: clarify documentation on BGP multiple AS
doc: add extra information on bgp views and vrfs
doc: embellish bgp view docs
bgpd: fix broken show community commands
bgpd: complete description code for communities
tools: reindent frr
staticd: add ability to create onlink static route
vtysh: fix exit-vrf printing
staticd: finish missing onlink pieces
lib: change M:A:C to X:X:X:X:X:X
doc: strip trailing whitespace
doc: add missing docs for ipv6 isis router cmd
doc: ignore libyang-building.rst in sources
doc: fix code-block syntax errors
doc: include maintainer release procedure in docs
.github: remove style reminder from PR template
frr: ignore libtool.orig
lib: remove agentx already enabled warning
zebra: cleanup some leftovers from removed cmds
doc: remove mention of 'secondary' ip[v6] commands
doc: update zebra protocol documentation
zebra: fix zebra router memleaks
zebra: force neighbor entry reinstallation
doc: use correct specifier for code block
doc: add dev doc for vtysh
bgpd: fix small error in community-list patch
doc: add section on protocol
*: only use 32-bit atomics
tools: add non-32 bit atomic warning to checkpatch
staticd: fix null0 routes (again)
update ref file for cidr mask display
.github: add core guidelines to issue template
bgpd: fix json double free when showing neighbors
doc: add `ip nht resolve-via-default`
doc: exclude snmptrap.rst from build
tools: fix systemd dependency graph
bgpd: fix as-path prepend heap uaf
Rafael Zalamena (162):
bfdd: remove global variables and improve logs
bfdd: remove VxLAN code
bfdd: make bfd_recv_* more generic
bfdd: enumerate all diagnositic codes
bfdd: use UDP sockets instead of raw
bfdd: use THREAD_OFF() instead of thread_cancel()
bfdd: fix crash when receiving invalid echo packet
bfdd: disable echo on neighbor request
bfdd: allow timer deactivation on shutdown
lib: fix a memory leak in FreeBSD
lib: refactor thread_execute
bfdd: fix multi hop hash lookup
bfdd: fix BGP unnumbered peer setup
lib: assert sysctl values
topogen: first code import
topotest: parameterize daemon's path
Topogen: document new options
topogen: add support for setting link state
topogen: implement memory leak test call
example: add missing __init__.py
topogen: implement __str__ for TopoGear objects
topotest: add guidelines
topogen: use shorter names for equipments
topotest: rename guidelines equipment names
topotest: small guidelines fixes
topotest: added two new sections to guidelines
template: change the default dot file
topotest: implement json_cmp function
topogen: added JSON output support for vtysh_cmd
template: allow test to be run without pytest
topogen: don't backtrace when topogen is not used
topotest: improve json_cmp assert output
topotest: add writing tests tips
topogen: support configuration file
topogen: add memory leak report configuration
topolog: implement a logging abstraction
topolog: support adding loggers during runtime
topotest: use topolog instead of print
topogen: add per router logging
template: update test template
topogen: configure daemon logging files
topogen: implement start/stop methods for TopoGear
topogen: add error functions
topogen: add support for ExaBGP peers
topotest: add JSON list comparation support
topogen: fix topogen memleak activation
topogen: implement router check method
topogen: handle JSON decode failures
template: add router check test
topotest: add text normalization function
topotest: add version comparison function
topogen: add equipment version handling
bgp_multiview_topo1: fix exabgp configuration
topotest: implement environment diagnostics
topotest: simplify ldp kernel check
topotests: make 'quagga' check optional
ospf: added convergence test for IPv4
ospf: added a convergence test for link failure
ospf: add memory leak test
ospf: add 'show ip ospf json' test
ospf: add some log calls to show activity
ospf: add IPv6 OSPF convergence test
topotest: implement 'ip route' functions
ospf: test route kernel installation
topogen: allow daemon spec in vtysh_cmd
ospf-topo: remove log file specification
ospf-topo: skip on tests on router failure
ospf-topo: show areas in the topology dot/jpg
bgp-ecmp-topo1: fix exabgp configuration file
bgp-ecmp-topo1: convert to topogen
bgp-ecmp-topo1: add convergence test
topotest: log sleep function
bgp-ecmp-topo: use the new sleep function
bgp-ecmp-topo: test BGP convergence
bgp-ecmp-topo: add support for FRR 2.0
topotests: make asserts show up in stderr
topotests: add topology name to assert output
ldp_vpls_topo1: set an error instead of exit
topogen: show pretty output for skipped messages
topogen: treat some corner cases on vtysh failure
topogen: router startup failure triggers errors
topogen: add support for eigrpd and nhrp
eigrp-topo1: convert to topogen
topogen: log diagnostics to file
topogen: save zebra version output
topogen: fix diagnostics failure
topotest: remove unused json_cmp unused parameter
topotest: allow passing options to difflib
topotest: json_cmp_result split error lines
topotest: improve json error messages
eigrp-topo1: solve output ordering problem
ldp-vpls-topo1: fix a json_cmp result assert
topotest: fix a regression in version_cmp
topotest/topogen: demote some messages level
doc: update README and add code snippets
topotest: specify why we are waiting
topotest: always show diff on json_cmp failure
topotest: show the user that we are waiting
topotest: improve informational messages
topotest: remove pid files
isis-topo1: import topology
isis-topo1: add topology graph
isis-topo1: test ISIS topology convergence
isis-topo1: test ISIS route installation
isis-topo1: check ISIS kernel route installation
isis-topo1: add support for stable versions
isis-topo1: add IPv6 ISIS topology test
isis-topo1: skip test on FRR 2.0
isis-topo1: check ipv6 zebra route installation
isis-topo1: simplify dictionary key removal code
isis-topo1: check IPv6 linux route install
topogen: import pytest assert function
topogen: fix assertion on `routers_have_failure`
ldp-vpls-topo1: support new OSPF JSON format
ldp-topo1: fix ip mpls route output format
*: ignore .pytest_cache directories
lib: improve json_cmp
topotests: fix json_cmp wrong list handling
isis-topo1: improve topology parser
isis-topo1: remove pseudo_TE-IS entries from check
isis-topo1: fix IPv6 changes and remove metric
lib: show run_and_expect spent time
lib: improve normalize_text with another case
lib: implement standardized compare functions
isis-topo1: use `run_and_expect`
ospf-topo1: use new output compare functions
bgp-ecmp-topo1: remove sleep and reduce code
bgp_vrf_netns: reduce code duplication
ldp-vpls-topo1: remove duplicated code and sleep
ospf-topo1-vrf: show errors and reduce code
lib: fix `ip4_route_zebra` header removal code
topogen/topotest: add support for BFDd
bfd-topo1: add convergence tests
bfd-topo1: add fast reconvergence test
bfd-topo1: import topology picture
bgp-ecmp-topo1: fix vrf default change
bgp-ecmp-topo1: fix some pylint warnings
docker: add support for running inside container
bfdd: fix multihop on FreeBSD
zebra: always define ROUNDUP and ROUND_TYPE
zebra: refactor route socket message handling
zebra: don't log errors on unsupported medias
bgpd: don't show default value in configuration
ldpd: add support for FreeBSD IP_BINDANY
zebra: fix compilation on OpenBSD
ldpd: fix startup on OpenBSD
zebra: remove duplicated code
zebra: replace zlog_err with flog_err
zebra: implement FreeBSD route attr handling
zebra: fix FreeBSD warning on fresh OS boot
zebra: fix another FreeBSD warning message
zebra: use proper sockaddr size in kernel_rtm
zebra: remove unused functions
zebra: fix routing socket AF_LINK handling on NETMASK
zebra: use rta_getattr for NETMASK
zebra: fix debug messages with prefixes
zebra: fix debug prefix string size
zebra: fix debug messages in ifam_read_mesg
zebra: make routing socket debug user friendlier
ospf6d: don't queue interface events
ospf6d: keep track of the socket set thread
ospf6d: fix FreeBSD IPv6 multicast group join race
Renato Westphal (135):
ospfd: remove unnecessary housekeeping code when using linked lists
doc: remove LibXML from the list of dependencies
doc: update build instructions for Debian 9
doc: simplify build instructions
bfdd: do not allow multihop peers without a local-address
bgpd: fix cleanup of dampening configuration
bgpd: handle NULL pointers in lcommunity_cmp()
bgpd: fix the "no neighbor A.B.C.D maximum-prefix" command
bgpd: fix some NULL pointer dereference bugs
bgpd: fix crashes caused by missing input validation
bgpd: add a NULL check to prevent a crash in the rfapi code
bgpd: fix NULL pointer dereference bug
bgpd: remove wrong assert
bgpd: fix bug while iterating over VPN table
bgpd: use the vrf_bitmap_*() helper functions when necessary
lib: fix the "no match ipv6 next-hop type" command
ospf6d: fix two "show" commands
ospfd: fix issue with the "no segment-routing prefix A.B.C.D/M"
command
lib: introduce new northbound API
*: add empty array of YANG modules
lib: add a new northbound plugin for ConfD
lib: add a new northbound plugin for Sysrepo
yang, lib: add 'frr-interface.yang' and associated stub callbacks
lib: retrofit interface commands to the new northbound model
yang, ripd: add 'frr-ripd.yang' and associated stub callbacks
ripd: retrofit the 'router rip' command to the new northbound model
ripd: retrofit the 'allow-ecmp' command to the new northbound model
ripd: retrofit the 'default-information' command to the new northbound
model
ripd: retrofit the 'default-metric' command to the new northbound
model
ripd: retrofit the 'distance' command to the new northbound model
ripd: retrofit the 'distance source' commands to the new northbound
model
ripd: retrofit the 'neighbor' command to the new northbound model
ripd: retrofit the 'network' command to the new northbound model
ripd: retrofit the 'offset-list' command to the new northbound model
ripd: retrofit the 'passive-interface' command to the new northbound
model
ripd: retrofit the 'redistribute' commands to the new northbound model
ripd: retrofit the 'route' command to the new northbound model
ripd: retrofit the 'timer basic' command to the new northbound model
ripd: retrofit the 'version' command to the new northbound model
ripd: no need to use qobj anymore to keep track of "router rip"
ripd: retrofit all RIP interface commands to the new northbound model
ripd: fix memory leaks when interfaces are deleted
ripd: fix SIGHUP handling
ripd: remove vty configuration lock
ripd: reduce excessive indentation in a few places
ripd: implement northbound callbacks to fetch neighbor information
ripd: implement northbound callbacks to fetch route information
ripd: implement the 'clear-rip-route' YANG RPC
ripd: implement two YANG notifications
yang: add a module translator for ietf-rip.yang
doc: add build instructions for libyang
tools: update checkpatch to allow indented labels
doc: update libyang build instructions
zebra: improve identification of loopback interfaces in the router-id
code
lib: set YANG search directory when creating libyang context
build: fix detection of the confd binary
lib: improve error handling when connection to confd is lost
lib: introduce function to retrieve the schema name of a data node
lib: make yang_dnode_get_entry() more flexible
ripd: fix display of the "distance" command
lib, ripd: rework API for converted CLI commands
*: remove the configuration lock from all daemons
tests: fix warning related to change in the hash API
lib: use prefixconstptr instead of const prefixptr
lib: don't fetch schema information when creating yang_data structures
lib: make it possible to create YANG data nodes containing state data
lib, tools: use CHECK_FLAG/SET_FLAG more often in the northbound code
lib: remove entire data tree on yang_dnode_free()
lib: introduce function that loads all FRR native YANG modules
lib: rework the yang schema node iteration functions
lib: add support for YANG lists with mixed config and state data
lib: do not subscribe to config changes on a state data tree (confd
plugin)
lib, tests: major rework in the operational-data callbacks
ripd: fix operational-data northbound callbacks
ldp-topo1: add some debug commands to facilitate troubleshooting
ldp-topo1: sync with PR#710 in FRR
ldp_vpls_topo1: add new topology for ldp pseudowires
ldp_vpls_topo1: skip all tests on stable/2.0
ldp_vpls_topo1: don't use pytest.mark.skipif
ldp-topo1: Remove check for protocol in installed LSPs
yang, ripngd: add 'frr-ripngd.yang' and associated stub callbacks
ripngd: retrofit the 'router ripng' command to the new northbound
model
ripngd: retrofit the 'allow-ecmp' command to the new northbound model
ripngd: retrofit the 'default-information' command to the new
northbound model
ripngd: retrofit the 'default-metric' command to the new northbound
model
ripngd: retrofit the 'network' command to the new northbound model
ripngd: retrofit the 'offset-list' command to the new northbound model
ripngd: retrofit the 'passive-interface' command to the new northbound
model
ripngd: retrofit the 'redistribute' commands to the new northbound
model
ripngd: retrofit the 'route' command to the new northbound model
ripngd: retrofit the 'aggregate-address' command to the new northbound
model
ripngd: retrofit the 'timer basic' command to the new northbound model
ripngd: retrofit the 'split-horizon' command to the new northbound
model
ripngd: fix SIGHUP handling
ripngd: implement the 'clear-ripng-route' YANG RPC
ripngd: implement northbound callbacks to fetch neighbor information
ripngd: implement northbound callbacks to fetch route information
build: update vtysh scan list for ripd and ripngd
ripd: remove leftovers from the old sighup handler
ripd: fix minor issues from the northbound conversion
lib: add support for confirmed commits
lib: implement the "show" command
lib: fix NETCONF network-wide transactions for confd and sysrepo
staticd: fix static analysis warnings
lib, tests: add support for keyless YANG lists
tools: update checkpatch to stop suggesting the use of kstrto()
ripd, ripngd: fix memleaks when deleting routing instance
ospfd: fix wrong argv index in the "show ip ospf neighbor" command
ospfd: convert a couple of "show" commands to DEFPY
zebra, lib: fix the ZEBRA_INTERFACE_VRF_UPDATE zapi message
zebra: silence harmless ioctl warning when retrieving interface speed
bgpd: fix parsing of community number in the "show bgp community"
command
lib: fix segfault on freebsd when using vsnprintf() incorrectly
ldpd: fix corner case in which we wouldn't respect the max pdu length
lib, zebra: add AFI parameter to the ZEBRA_REDISTRIBUTE_DEFAULT_*
messages
lib: fix "may be used uninitialized" build warning
lib: fix "use of uninitialised value" valgrind warning
lib: don't abort when incomplete xpath is given by the user
lib: update suggestions related to some northbound errors
doc: update build instructions for freebsd on how to obtain libyang
lib: fix checking of clients subscribed to receive default routes
lib: use the correct VRF ID when parsing INTERFACE_LINK_PARAMS
messages
zebra: send link parameters to zclients once they request interface
info
doc: fix small inconsistencies in the table of zapi command values
lib: reset the vty xpath index when entering the config mode
lib: simplify detection of when the user is leaving the CLI config
mode
zebra, lib: send VRF backend to the client daemons
lib: remove the vrf_is_mapped_on_netns() function
python: make DEFPY provide the text token of fixed parameters
zebra: fix the "show ip import-check" command
pbrd: fix removal of ipv6 nexthops
pbrd: add missing newline at the end of warning message
isisd: fix crash when entering "no ip[v6] router isis" twice
bgpd: fix null pointer dereference bug
bgpd: fix the add-path code to understand the mpls-vpn safi
Rodny Molina (2):
fabricd: Disabling OpenFabric optimization to avoid considering T0
devices only as DNRs
Minor adjustments to address CI warnings
Ruben Kerkhof (2):
configure.ac: fix a typo in an error message
configure.ac: consistently quote all m4 macros
Sarita Patra (3):
pimd: fix indentation warnings
ospfd: handling of OSPF_AREA_RANGE_ADVERTISE flag
bgpd: remove ip prefix from as-path, <large,ext>community-list
Simonas (1):
Fix typos in BGPd sample configuration file
Sri Mohana Singamsetty (3):
bgpd:Fixing the signature of community_free function
watchfrr: replace /usr/sbin/service frr with /usr/lib/frr/frr script
watchfrr: Echo statements are blocking the execution of frr script
Thibaut Collet (4):
vrf: return vrf implementation for default vrf
zebra: fix crash when interface vrf changes
lib/if.c: fix CLANG warning
zebra/lib: code cleaning
Tim Bray (1):
Link-detect documentation
Tore Anderson (1):
doc: correct route map match for prefix lists
Vincent Bernat (1):
bgpd: fix IPv6 next-hop field name for routes in JSON
Wilhelm Wijkander (1):
Update RPM building instructions
dturlupov (1):
eigrp: opnional metric in 'no redistribute'
jpmondet (1):
frr-reload.py: Add python2 & python3 compatibility.
paco (2):
bgpd, doc, ldpd, lib, tests, zebra: LM fixes
lib, lm-proxy-topo1: label manager proxy test
rgirada (2):
ospfd: default route got flushed after lsa refresh timer.
ospfd: issue with the "default-information originate always" command
#2980
root (2):
pimd: create a new command "ip pim" configuring pim sm
bgpd: Creating Loopback Interface Flaps BGPd (#2865)
vishaldhingra (4):
zebra: vrf aware routmap is missing in Zebra #2802(Part 1 of 4)
zebra: vrf aware routmap is missing in Zebra #2802(Part 2 of 4)
zebra: vrf aware routmap is missing in Zebra #2802(Part 3 of 4)
zebra: vrf aware routmap is missing in Zebra #2802(Part 4 of 4)
vivek (9):
zebra: Update neighbor state correctly upon move
bgpd, zebra: EVPN extended mobility support
zebra: Enhancements to EVPN operational commands
bgpd, zebra: Fix warnings
zebra: Fix warnings
zebra: Remove unused parameter in MAC delete
zebra: Uninstall remote MACs from kernel appropriately
zebra: Use boolean for certain VxLAN-EVPN flags
zebra: Fix neighbor update to BGP
2
1